Get the best price per M2 with our Sandwich Panels
WhatsApp: 683 44 26 08
E-mail: info@panelsandwich.org
Standard Cellular Polycarbonate Panels are polycarbonate sheets with honeycomb structures that provide the product with insulation and resistance. All polycarbonate sheets are protected from ultraviolet rays by co-extrusion of U.V. absorbers on the outer face.
REQUEST PRICE AND TECHNICAL INFORMATION
The fastening system must allow the free expansion of the sheet, therefore rigid fasteners or through bolts are not recommended. Always provide sufficient clearance between the bore and the screw.
Whenever possible, ribs should be provided in the direction of the maximum slope of the sheet to ensure minimum dust accumulation in the cavities.
The sheets require a longitudinal and/or transversal support structure that can be of any nature or geometry. In the modulation, the maximum dimensions of the sheet must be respected according to the thickness of the loads to be supported, making them compatible with an adequate cutting.
The sheets are protected by a film on both sides indicating which side is protected from solar radiation.
When it is necessary to seal the joints, the compatibility of the polycarbonate with the sealant must be ensured (neutral silicone is recommended).
It is essential to cover the cells to prevent dust from entering the interior of the sheet. Aluminum tape is recommended at the ends: smooth at the top and porous, allowing condensation water to drain out at the bottom.
If it is necessary to perforate the sheet, fastening buttons should be used.
We assemble sandwich panels thanks to our own team specialized in roof assembly. We take care of the necessary measurements, material supply, transport and lifting methods. Leave everything in our hands for the renovation or new construction of our sandwich panels. If you need asbestos removal, we have equipment, EPIS and personnel prepared to perform it, all in compliance with current regulations.
Our technical office reviews all the products and materials necessary for the installation of panels, trims and fasteners. We offer our customers new and second-hand panels as well as second-hand panels at the best prices on the market. The advantages of the polyurethane sandwich panel are that it is lightweight, ideal for enclosing roofs or facades and is highly insulating.
Do you need personalized advice?
Contact us and we will answer any questions you may have about our sandwich panels, their installation and applications.
131 Palauet Street
Catalunya – Lleida – 25001
info@panelsandwich.org
Tel: +34 973 22 81 64
Mobile: +34 683 44 26 08
