Get the best price per M2 with our Sandwich Panels
WhatsApp: 683 44 26 08 E-mail:

Metal Belt – Structural Large Omega

Out of stock


This product is the culmination of 2 years of research and development in search of a solution. The result is the most economical and strongest light steel section available on the market. This innovative profile, from the omegas family, allows significant weight reductions, compared to the most advanced solutions on the market, for the same level of structural performance.

The profiles are obtained by cold forming, which allows a high production rate as well as a high dimensional accuracy. Produced on a continuous roll-forming line, the profiles are made to measure and with different perforation patterns that facilitate the assembly process through the possibility of bolted joints.



The versatility of Superomega® allows a wide applicability to different types of structures as well as adaptation to almost all types of materials. This profile can be applied to:

  • Secondary structure for roof support for roofs and facade
  • Internal partitions
  • Structures for mezzanine and intermediate floors
  • Light coverage in LS
  • Supports for photovoltaic panel systems

Main differences with other solutions in the market:

  • Increased material savings versus structural performance
  • Profile optimized for containerized transport
  • Possibility to define a continuity connection in the support area or outside the support area
  • Drilling adapted to the application
  • Continuous drilling possible
  • Futuristic and aesthetically appealing geometry.


The range consists of 5 Ω-type cross-section profiles, with heights ranging from 80 to 250 mm and thicknesses ranging from 1.0 to 3.0 mm.

cms GRANOMEGA medidas

cms GRANOMEGA seccion

Quality of materials:

The SuperOmega is produced in 2 pre-galvanized structural steel grades: S280GD and S350GD in pre-galvanized sheet metal or Magnelis according to EN 10346. Optionally, this product can be supplied with another type of surface finish, specifically with RAL lacquer to be defined. Delivery conditions on request.

cms GRANOMEGA clase de acero

Drilling patterns:

Drilling patterns superomega® can be supplied either undrilled or with 2 different drilling patterns, depending on the project requirements and as explained below.

Pattern A – Customized drilling Drilling Ø14 for M10 bolt – class 8.8 in the lower flanges of the section and in the upper part of the webs, defined on the basis of the project needs. Usually, this drilling will be defined at the supports and overlapping areas to ensure the transmission of continuity forces.

Drilling is done in blocks of 5 holes spaced 50 mm apart. The distance between the end of the profile and the axis of the first column of holes can be set between 25-30- 35-40-45-50 mm.cms GRANOMEGA perforacion


Cubierta montada con panel sandwich teja
Cubierta montada con panel sandwich teja

Sandwich Panel Installation and Demolishing

We assemble sandwich panels thanks to our own team specialized in roof assembly. We take care of the necessary measurements, material supply, transport and lifting methods. Leave everything in our hands for the renovation or new construction of our sandwich panels. If you need asbestos removal, we have equipment, EPIS and personnel prepared to perform it, all in compliance with current regulations.

Our technical office reviews all the products and materials necessary for the installation of panels, trims and fasteners. We offer our customers new and second-hand panels as well as second-hand panels at the best prices on the market. The advantages of the polyurethane sandwich panel are that it is lightweight, ideal for enclosing roofs or facades and is highly insulating.