The installation of sandwich panels is carried out on a metal structure, a “ready to use” wall, roof, ceiling or partition wall is delivered to the installation in accordance with the specification.
Type of sandwich panel installation:
Vertical installation of sandwich panels requires welded or welded purlins.
galvanized. Vertical installation of sandwich panels is recommended up to 7 meters.
Horizontal installation of sandwich panels does not require straps, allowing panels to be installed with almost no height restrictions.
Frameless construction from sandwich panels is a special case when the installation of sandwich panels is carried out without load-bearing structures.
PANEL MOUNTING
The installation of the sandwich panels must be carried out according to the project. Please note that for a high quality installation, it is imperative to use related materials: thermal pads, thermal fasteners, sealants, polyurethane foam, special tools, etc.
Highlights of the facility:
Wall sandwich panels or roof sandwich panels are fastened by means of self-drilling screws with a diameter of 6.3 mm.
The length of the screw depends on the thickness of the panel to be installed: from 80 mm to 250 mm.
Fixing of the sandwich panels to the concrete is organized by means of special high quality metal fasteners.
The sandwich panels are joined together with a gap, which must then be filled with rock wool or polyurethane foam. The angular joint of the sandwich panels overlaps.
